How to override IP Reputation blocked IP

Community forum to discuss cxs.
If you believe that there is a problem with your cxs installation and want support then, as a paid product, you should use the helpdesk after having consulted the documentation.
Post Reply
sneader
Junior Member
Posts: 84
Joined: 22 Mar 2007, 05:38

How to override IP Reputation blocked IP

Post by sneader »

I have a client that suddenly could no longer send mail via SMTP through our server. I traced this to their IP being in the LF_SMTPAUTH.txt blocklist (in the CXS IP Reputation feature), which we have enabled.

I confirmed that the user had never had an SMTP failure with our server (further confirmed by trying to remove the IP via the cxs --Rremove command, which failed because our server was not the server that added the IP to the list).

So, the user must be failing authentication via SMTP via some other server that participates in the CXS IP Reputation system. Since there is no way to find out any further information on that, the client will need to check every machine to look for login failures.

Meanwhile, I need to allow the client to start sending mail via SMTP through our server. The client has a static IP address from their ISP, so I added their IP to the CSF Ignore list, then restarted CSF + LFD, but this did not work. Out of desperation, I had to disable our use of the LF_SMTPAUTH blocklist.

So, the question is: How can we allow a customer to override the IP Reputation system, and continue to access our server, despite being on one of the IP Reputation System lists? (other than not using the blocklist, which seems like a bad solution)

- Scott
sahostking
Junior Member
Posts: 31
Joined: 29 May 2013, 19:07
Location: Cape Town, South Africa
Contact:

Re: How to override IP Reputation blocked IP

Post by sahostking »

I think we experienced a similar issue before using the CC_IGNORE feature where we would like a country and customers IPs would still be blocked I think if they existed in those CXS lists.

I am not to sure if there is way but hopefully someone has an idea how to do so.
Post Reply